Protect Existing Areas
The floor and kitchen surfaces were covered and protected before the alteration work progressed.
SCE Project | Greenwich NSW
Ground-Floor Kitchen Wall Alteration Project, Greenwich NSW
This completed ground-floor kitchen wall alteration involved protection of existing surfaces, temporary support, installation of a new beam, rendered make-good and completion of the altered opening.
Project Overview
SCE completed a ground-floor kitchen wall alteration in Greenwich, NSW. The sequence progressed from protecting the existing kitchen and floor surfaces through temporary support, opening works, beam installation and rendered make-good.
This ground-floor alteration is a separate project from SCE's top-floor kitchen wall alteration project, which involved a different property setting and work sequence.
Protection and temporary support were maintained while the kitchen opening and new steel beam were completed.
For current service information, review SCE's remedial structural alterations service and construction support available in Greenwich, NSW.
- Project typeKitchen wall alteration
- SettingGround-floor kitchen
- LocationGreenwich, NSW
- Project focusSteel beam and rendered opening
Kitchen Wall Alteration Scope
The project comprised four connected work stages. Requirements for another property must be confirmed from its existing construction, proposed alteration, access, project documentation and applicable approvals.
Install Temporary Support
Temporary support was placed in accordance with the project design.
Install the New Beam
The existing opening was altered and a new steel beam was installed with temporary support retained during the work sequence.
Render and Make Good
The beam area and altered wall opening were rendered and made good to complete the wall-alteration scope.
The finished opening is the result of both structural work and careful make-good. The project photographs show the original kitchen, protected surfaces, the supported beam installation and the rendered opening as one connected scope.
Kitchen Wall Alteration Project Video
Watch the project video covering surface protection, temporary support, beam installation, rendered make-good and the before-and-after opening.
Watch the Greenwich kitchen wall alteration video
Project Gallery
The gallery follows the kitchen opening from the original arrangement through protection, support, beam installation and completed make-good.
Planning a Similar Alteration
An initial enquiry should identify the property type, the wall or opening involved, the proposed outcome, available drawings or reports, access conditions and any known approval requirements.
Discuss your structural alteration with SCE. Share the scope, available drawings or reports, access requirements and approvals so our team can plan the works. The SCE System explains SCE's structured approach to planning, delivery controls and closeout. Review our certifications and registrations and the wider SCE project portfolio for supporting experience.
Related projects and services
Frequently Asked Questions
For related questions about scope, budgets, approvals and staging, explore our renovation and fit-out planning questions.
What work formed part of the Greenwich kitchen wall alteration project?
The scope covered protection of the existing kitchen and floor, temporary support, installation of a new beam, rendered make-good and completion of the altered kitchen wall opening.
Where was the kitchen wall alteration completed?
The work was completed in a ground-floor kitchen in Greenwich, NSW.
How were the existing kitchen and floor surfaces protected?
The project photographs show protective coverings across the floor and kitchen surfaces before the wall-alteration work progressed.
Can SCE review a similar kitchen wall alteration enquiry?
Yes. Use SCE’s website enquiry form to share the existing kitchen layout, proposed opening, property location, photographs, drawings and known access or approval requirements. SCE can coordinate engineering assessment and design, the required approvals and inspections, temporary support, beam installation and internal make-good through to the required certification and handover. The scope is developed around what will be retained and what will change in your kitchen.
Discuss a Wall Alteration Scope
Share the property type, project location, proposed opening, available photographs, drawings or reports and known approval requirements so SCE can review the proposed scope and next steps.